PIPEAID PATCH BOXES
PipeAid Patch Kits for the permanent and watertight repair of damaged pipes, without the need for excavation work.
PipeAid Kits can repair 70mm (3in) – 525mm (21in) diameter pipes. Available in 500mm (22in) and 1m (3ft) lengths. Special sizes manufactured on request.
Suitable for repairs up to 90o bends Repairs 100mm (4in) and 150mm (6in) diameter pipes
Repairs 100mm – 300mm diameter pipes.
Leak tight cure in 6-10 min.
Two-part resin bag
Pre-measured fibreglass matt
Plastic cable ties & wire ties
Information & installation manual
- Pipe Aid is a high performance no dig pipe solution.
- Permanent and watertight
- Meets requirements outlined in WRc’s ‘Drain Repair Book’
- Cures in the presence of water
- Highly resistant to chemicals
- Convenient kit format
- Excellent bonding to virtually all pipe materials
BULK PATCHING MATERIALS
RSM Pipe Aid can also be purchased in bulk kit form.
1.25m (4ft) & 2.5m (8ft)
Winter, Summer & Fast Patch – 42kg (93lbs)
BULK RESIN & MATTING AVAILABLE:
26kg (57lbs) silicate resin / 16kg (35lbs) waterglass kits
250kg (551lbs) silicate bulk resin
325 (715lbs) bulk waterglass
Matting is available by the kilo: in 1.25m (4ft) and 2.5m (8ft) widths for straight repairs in 1.25 (4ft) width for repair of bends
Bulk protection hoses, packer wrap and copper wire available
Packers are utilised in conjunction with glass matting and silicate resins, in a point repair system to provide a permanent, leak tight and structural fix over displaced joints, and damaged sections of pipework.
Packers are specially engineered to provide as much flexibility as possible for easy insertion and with as larger diameter flow through as practically possible to ensure that in larger diameter pipes there is no requirement for additional overpumping.
Radius, lateral and wheeled.
Diameters from 25mm (1in) to 1200mm
(48in), lengths 600mm (24in) to 5000mm (200in.)
Constructed of cord reinforced rubber with Kevlar reinforced ends for
Circular, oval, egg and flat bottomed.